Description
- 【500mm/s Lightning-Fast Speed】Equipped With Klipper firmware and powerful processor, ELEGOO Neptune 4 pro can print at 500mm/s amazing speed, allowing you to produce your creation faster! Recommended printing speed is 250mm/s
- 【Upgrad for More Precision】Both the X and Y axes of Neptune 4 Pro are upgraded to robust all-metal guide rails with U-shaped steel wheels, to ensure less drag and more precision. 8.85×8.85×10.43 inch/225x225x265mm build volume
- 【Segmented Heated Zones】The 3d printer has 2 independent heating areas . Slicing software automatically identifies the model size and activates peripheral heating zone if it exceeds the central heating zone. Significantly reduce power consumption, speed up heating
- 【Direct Drive Extruder】Self-developed dual-gear direct drive extruder has a 5.2:1 reduction ratio, providing powerful extrusion and smoother filament feeding. Paired with metal throat pipe and unique air duct design to reduce nozzle clogging risk
- 【Easy to Use & Widely Compatible】121 (11×11) points auto bed leveling ensures quick and accurate leveling. 300°C high-temp nozzle and extended hot end ensures filament faster melting and extrusion, Neptune 4 Pro can handle various filament materials, including PLA, PETG, ABS, TPU and nylon
Dozer –
So I tried using the software to transfer files to be printed and they can’t transfer the file. It can’t read outside files and it can’t do anything with any files whatsoever to turn them into g code. I had to convince my wife to allow me to get this and now I get to hear about my paperweight until we can get it to work. Sad days ahead for me.24hrs later: it now will not read a card after only having the card inserted only a few times. It was inserted the correct way and it was reading yesterday. Well crap I can’t even reprint budda anymore.
sceddy –
I own an Elegoo Neptune 4 and it works very well. I needed to add a second 3d Printer in another location and I ordered a Neptune 4 Pro. I am very proficient at setup and usage of 3d printers and this device went together flawlessly. Unfortunately the first large print failed half way through with very apparent print head problems. After shutdown the print head could not even be reloaded with new “Elegoo” PLA. Completely stopped up. I contacted Elegoo with no response except a couple form emails. No apparent methods to contact Elegoo. I do not recommend this company for customer service.
Amazon Customer –
Fully assembled in an hour and simply put, it works and works well. I’ve printed approximately 10 pla prints so far, all multiple hours and its printed perfectly every time. Preheat, do the auto bed level check, set Z height and press print. It’s that simple. I like the removable and washable bed too.
PA –
it was ok to start but got worse if you want repair stuff and don’t mind buy it
Amazon Customer –
Thing has worked as needed beside a few hiccups with pla and
Michael –
Had some concerns about buying this one due to video reviews. I had taken a leap of faith buying this and was very pleased with my decision. Have been nonstop printing with this machine for two weeks now. Self leveling lets go of any stress about first layers. The size of the build makes it awesome to print life sized pieces.
Mr Fox –
Honestly this was not a bad printer, but by the time I fixed one issues I was faced with another. I would recommend you just do what everyone else says and get a bamboo….. I have already sunk close to 85 dollars in replacement parts under 2 months.
Jim O. –
I am a beginner and have printed 12 articulated dragons and shark. So far, I have had no problems with the printer and quality of the prints have been good.
anthony –
I cant make fat tiddies with it yet but i will.
jakk –
I would not say it’s for beginners. but if you put in the time you can get alright prints.
Ricki Wright –
Love this!!
JavierO –
Es muy buena impresora, pero la configuración de la primera capa es muy complicada, no tiene perfil en Prusaslicer y al imprimir modelos cercanos a los 265mm de altura, el cable se estrella con el paral superior y vibra mucho.
Andrew –
I bought this to prototype enclosures for Arduino projects I was designing. I ended up getting side tracked for 3 months printing all sorts of things and gifting them to coworkers.This is my first 3D printer, but it’s been great. It prints very fast, high quality. I’ve had to replace a couple parts (my oopsie), and the extruder and build plate are inexpensive and easy to replace.I’ve prototyped parts for work (brackets, mounts, etc), and they’ve come out remarkably accurate. I’ve used it to make drill hole templates, very accurate.I’ve put this thing through the wringer for 4 months, and it’s still running great. The learning curve was smoother than I expected.
Star Gamma –
This was such an easy printer to set up as someone who knew nothing about 3D printing. So far I’ve already printed an entire helmet and chest plate and have had no issues! 10/10 recommend
Angelo Becerra –
Facil armado, configuración, calibración e impresiones muy buenas.
Arthur –
The bad: I had to disassemble the bottom in order to get to the board because the z motor wasn’t working. Turned out the connector was unconnected and the pins were bent severely. Also, the board has a ton of glue connecting pieces to the board… UPDATE: Added to the bad. There has been a plethora of random small problems through the first two weeks of printing. From the nozzle not being fully attached leading to huge blobbing inside the silicone sock, to the board just deciding that moving up the Z axis when trying to clean the nozzle between test prints is just too much to ask so i have to reboot it to get that controller to work againThe good: after repairing it the setup was fairly easy! The small tablet controller is very intuitive and easy to use. Firmware is a little annoying to update but nothing too bad.
Anonymous88 –
Great Durability! I need to learn more about 3D printing. I had trouble transferring images to SD card. Works great using USB Cord!
AUBREY STOLL –
This printer does well if you know how to troubleshoot when something goes a stray. It runs klipper that you can modify. Pats are well made. If you are looking for a printer that is plug and play this may not be for you. If you are willing to adjust it and tune it then it does grate
Katie –
We were having great success printing several things. Then the SD card stopped working. Everything we read online says not to format the SD card. So now we have an unusable Printer after less than 24 hours of use.