Description
- 【9.1-inch 6K Mono LCD】ELEGOO MARS 4 Max features a 9.1-inch monochrome LCD screen with a resolution of 5760×3600 and an XY resolution of 34um, and printing speed up to 70mm/H. The 9H hardness tempered glass with excellent light transmission protects the LCD screen from scratches and damage caused by resin dripping or penetration.
- 【COB+ Refractive Light Source】MARS 4 Max adopts the COB+ refractive light source to ensure that the emitted 405nm wavelength beam is more vertical and uniform on the entire LCD screen after refraction. Paired with the full grayscale anti-aliasing algorithm to make printed models with finer and more realistic details and a smoother surface.
- 【Large Build Volume】The large build volume of 195.84×122.4x150mm (7.71×4.81×5.9 inches) provides you with more creative space to print a large model or print multiple parts in batches, thus increasing your productivity.
- 【Efficient Heat Dissipation】Double fan cooling system design, one for air inlet and the other for air outlet, has faster air circulation and higher heat dissipation efficiency, which extends the service life of 3D printers.
- 【Voxeldance Tango Software】It has 3 printing modes: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, when the printed model cross-section is small, the print lifting speed is faster to improve printing efficiency; on the contrary, the printing speed will slow down. Combined with ELEGOO self-developed new open-source GOO slicing format, which supports multiple slicing software without restriction.
carestvill –
Me parece una buena inversión ya que puede imprimir con fiabilidad y rapidez muchas figuras. El único inconveniente es el olor pero es algo que viene con todas las impresoras 3d de resina
juddwood –
TLDR: I’m on my SECOND M3P, and it just crapped out on me after my 6th print. Motor died on the first one after about 2 weeks; replacement motor sent (3 week wait) exhibited the same issue after 2 successful test prints. I’ve spent hundreds of dollars and countless hours on this absolute piece of garbage – watched all the tutorials, read the manual endlessly.I typically have few issues with tech products or tools but this one’s a unicorn – in all the wrong ways. I cannot stress enough how damaging this machine is to your soul. You read that right. Your “creative experience” will be reduced to tech support responses of “update firmware and we’ll send you a new motor”, followed by weeks of waiting. Once it arrives, Take your hour to disassemble your machine (again) and replace the motor, and you’ll be back talking to tech support in no time. Because the same d*mn thing will happen again in a matter of a few prints. Inspired?
David Goodwin –
I’ve gone through two of them and they both had different issues.
Derrick Samuels –
Machine doesn’t works just print for hours without sticking to the plate
GMacW –
I purchased this Elegoo Mars 4 Max as my first 3D printer. Although I’m very mechanically & technology inclined, the free software that came with this printer instructions are not the greatest. However, the printer worked great for about 10-15 prints then about a month into it the LCD screen on the front started working odd. Meaning there are three circles that show up when you start up printer, tools, settings & print. if pressed the circle nothing would happen, but press about an inch below circle and it would move to the next screen. I contacted Elegoo support and told them the problem. To honest, I expected to have to send multiple mails to gat response but they got back to me within a 24hr period. After a few tests & sending them a video of the issue, they sent out a brand new LCD screen with instruction link for install. Was very easy to change out and I’m happy to report that everything works great again. Elegoo, thank you for your prompt support!!!
Vincent Goss –
It’s a VERY large investment, but when you start printing, not only is it addicting, but you’ll quickly learn just how much you’re saving on things like DND minis. Printed probably a few hundred dollars in minis for pennies worth of resin.Wouldn’t recommend this for a beginner though, as I had to learn a LOT of things the hard way.
bigapplediva –
5 prints, then cancer because the resin vat fell off the screws and I was looking at the bottom of the printer when it spilled on me. DO NOT BUY!!!
Jose Gomez –
Muy buenos productos a un un excelente precio, recomendados
Jacob D Lester –
I received this printer on Friday and have had failed print after failed print. The print bed cannot be leveled… facing the front of the machine the left side will hold the paper but the right freely slips out. I have only been able to get on successful print by going to zero getting level best I can with the set screws tightened. Then move the bed down 1mm as many times as I can until the paper will not move anymore and backing off by .1mm at a time until I find it is set. My problem with this method is I’m very concerned it will damage the LCD and I can find any instructional videos that show anyone in their right mind utilizing this method. I have spent all weekend waiting for prints to fail, then draining and cleaning the printer, only to go through the whole process again. This last time I finally had some lubricated to apply to the release film which did not help the issue at all. I’m at a loss and I’m hoping that the Elegoo customer service will help with this issue as I really need this printer for work and school. Sorry for the rant but I hope this is helpful to others looking into this printer and I will update when I have more information.
Nic3k –
The little instruction booklet (of the “we don’t need words” variety) was useless; several parts don’t even match this model of printer, and lots of things are left out. This last was a pain, because we didn’t know to take off the plastic sheet clinging to the build plate — it looks just like the plastic on the bottom of the resin tray, but apparently it’s just packing material. Eventually we figured it out, but we had several problems in the meantime. The resin tray is slightly annoying to take in and out. But overall the printer works great, and the resolution is amazing after using FDM printers. Don’t underestimate how bad resin smell is — you can get plant-based resins that are somewhat less annoying.
Colona –
It’s super easy to use and is very fun to mess around with. The details can be super smooth and the only downside is it takes a long time but thats just how that goes.
Damien Miller –
Love this product, great for first time users. Had mine up in running in minutes. Did have difficulty with their test model though. Part of that was my selection in resin, choices.
Pablo Bonilla M. –
La impresoI am not an expert in 3D printing, I have been using resin printers for around 6 months, I really like the Mars 4 Ultra, it is economically accessible and also versatile, it is my humble opinionra es genial, mi única duda es el film
Nick –
I have been printing like a mad man since July last year. i have 3 armies and am looking forward to my 4th. I have printed armies for 3 of my friends. Then the screw retainer on my vat broke. I contacted customer support on their website with my order number from this webstore and they said THEY ARE GOING TO REPLACE THE PINTER. You herd me correct, They are sending me a new or refurbished (i don’t care witch) printer.Other notes I went from knowing nothing about 3d printing to a pro with this machine. you can to if you follow these steps.1 watch a ton of youtube videos on what to and not to do.2 select witch Elegoo Pinter fits your purpose and budget, and make sure you note the warranty.3 pint to your hearts content and learn as you go
David C Farcus –
I have been printing with FDM printers for years and got this as my 1st resin printer. It was easy to set up and I am getting great results without a lot of experience. I highly recommend it to any beginner!
Yes, I bought this –
Elegoo makes good machines for good prices. I don’t think that there’s anything outstanding about this one, but it works well and enables the printing of larger objects.The only potential downside is that the machine required objects to be sliced into Elegoo’s new format. What this format adds to the 3d printing space is unclear, as is why it was needed at all. It didn’t take Lychee much time to release an update that enabled printing to the GOO format, so no issue there. (Ironically this is actually very convenient for me. Having files sliced for different printers in different formats allows me to instantly determine if I’ve already sliced a file for that printer. a GOO file? Good to go on the Mars 4.)I’ve got no issue recommending this printer.
Robert Shepherd –
We have both the 2 and the 4. I can say that they have been used every day. Make sure that you get the curing station as well makes your work easier.
Tim –
My wife and brother got me the Mars 4 Max for my birthday. Loved it. First couple prints were amazing. Then it went downhill. The screws for the vat stripped. No resin was in there to harden and mess up the screws. The motor started to lock up and it smelled like burnt plastic. The rod would lock up and the build plate would get stuck. Fought with elegoo to get a replacement. Finally got one. Took a hiatus for about a month and a half after receiving the new one. Just picked it up two days ago and now my build plate doesn’t recognize home and just presses into my LCD. The limiter works. I’ve set home way above the screen to reset it but it doesn’t save and goes right back to pressing into my LCD. I found out a lot of people were having this issue. I’ll be sending mine back. That’s 2 printers in less than 3 months.
Brian Aka –
Had a couple issues with my first printer but I contacted customer service and they made it right! If anything buy ELEGOO for their customer service. It’s incredible.