To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Lee –
3.0 out of 5 starsFor a sub $200 printer, this is an ok machine with a good amount of features, but print quality is inconsistent. Any time a print needed support I ran into a bunch of issues. I returned it to get a better printer that is more consistent.
Wp –
5.0 out of 5 starsThis thing is great
Heather Valudes –
5.0 out of 5 starsThis is my first 3D printer and it’s been great to learn on! I used the Creality slicing software for the first month and eventually switched to Cura. This has been a work horse for me and my family! Love it!
Barry Wingler –
1.0 out of 5 starsI have been printing for a few years now and when i started in the hobby all machines were in kit form, Decided I wanted a new faster printer and bought this new ender 3, Sure it only took a few minute’s from box to desk and ready for the first print, This printer is just pure grade JUNK. It has horrible layer shift and I checked the belts and they are tight. It has shift on all three axis. This recycled piece of plastic that is being passed off as a printer is getting boxed back up and returned. I refuse to work on a brand new printer that is suppose to print out of the box.UPDATE: Found the problems with the layer shifting:1: Most of the bolts that hold the printer together was loose, that fixed the X and Y layer Shift.2: Gantry is of a poor design, Three sided extrusions and to top it off the tapped holes for the bolts are only half threads, the rest of the holes is open air nothing there. Very poor design on Creality factory for even producing something like that. Only way to sorta fix the wobbly gantry is making a strut system and taking off the spool from top and side mounting it. Personally It is not worth the effort or expense to fix a 200.00 dollar printer, Others out there in the same price range without all of this poor design.
Rodolfo Escobar –
5.0 out of 5 starsNos tiene ensayando y nos sentimos muy bien con su acabado
Waste of 486$!!!! Couldn’t even get it set up, dug into the bed! Threw every code in the book! CREALITY IS A NOOOOOOOO GO, will never purchase from this company again, gave the trash can 486$ on this one! –
1.0 out of 5 starsEverything
Amazon Customer –
4.0 out of 5 starsThe first machine had to be shipped back. I got a refund and ordered a new one. Shipping was quick! We unpacked this one and it works! It’s a lot of fun!Now, be prepared to do some research online and watch some videos. Machine comes with instructions to assemble but not to operate. This is not a device you plug in and play. It takes a few different online tools to run but once you learn the process, you’ll enjoy the finished products.
tracy –
5.0 out of 5 starsAs a user of the Creality 3D Printer CR-10 SE, I’m delighted to share my experience with this machine, highlighting its ease of use, excellent quality, and reliability.To begin with, the setup process of the Creality CR-10 SE is incredibly straightforward. Equipped with an intuitive touchscreen interface and clear operating instructions, even users with minimal experience can quickly get started. I found myself adjusting settings and initiating prints in no time after unboxing.Moreover, the print quality of this 3D printer is truly impressive. It utilizes stable and reliable printing technology, capable of achieving high precision and consistency throughout printing tasks. I’ve successfully printed complex models and intricately detailed objects with exceptional results, meeting or even surpassing my expectations.Furthermore, the Creality CR-10 SE demonstrates outstanding durability. Constructed with high-quality materials and precision manufacturing, it ensures long-term stability and performance. Despite prolonged usage, I haven’t encountered any issues, and the printer continues to perform flawlessly.Lastly, I want to emphasize the supportive user community and resources provided by Creality. With a wealth of tutorials, videos, and forums available, users can access valuable information and solutions to any challenges they may encounter. Additionally, their customer service is responsive and helpful, addressing user queries and issues promptly.In summary, the Creality 3D Printer CR-10 SE is a reliable choice for 3D printing enthusiasts. Its ease of use, top-notch quality, and dependable performance make it my preferred option for all my printing needs. If you’re considering investing in a 3D printer, I highly recommend considering this exceptional product.
Joe Wichman –
1.0 out of 5 starsThe instructions didn’t come with an English version. So I had to watch a video and that video was really confusing. The reason why is the video never said what side of the machine parts needed to be mounted and for a beginner it was hard to understand. Eventually I got it together but it didn’t work. So I sent it back and I had to get USAA involved to help get my refund back. I went through the steps with Amazon but the seller never wanted to respond. So I waited 10 days for a refund and then got USAA involved to get my refund back. About 4 days after that the seller sent a refund with no explanation why they didn’t want to respond or apologize for there mistake. I would not recommend anyone buying from them. Find some other company because this seller won’t respond to any issues at all!!
nahtanoj92 –
4.0 out of 5 starsThis printer is fast, the auto z offset works pretty good, the lates update added the feature to modify it manually once it auto sets, it’s quite loud but it does very nice job, I wish it had the same build volume like previos CR printers, this one is the same size of a ender 3 v2 or v3 220x220x260,after 3 months of use the auto offset sensor went bad, customer service sent me a replacement and a link to watch a video on how to replace it, very easy for me, since then I have not have any issues!
Milton Pomales –
4.0 out of 5 starsFor beginners is a decent printer. However, there is a huge bridge between assembly of the printer and printing other files other than the one that comes with the machine. My printer was missing some screws but, I made it work. If you don’t have a medium mechanical understanding and above computer knowledge, is going to be uphill with this, unless you are a computer person from the 1980’s!!! Its a good hobby is you have the time or are retired.
Artist –
3.0 out of 5 starsI just got this print about a week ago and have been “trying” to make prints with it. I was able to print a benchy and some sculpts off of blender, but then that’s when the problems started coming. The bed had a dip and I was able to fix it with tape to level it out, the power plug is so loose that it keeps stopping mid print and something forgetting what progress was made, and now the motor won’t extrude the filament even after cleaning the nozzle. So be aware of if your going to be getting this printer, I is not beginner friendly and you’ll have to do more work to get it working right.
Thomas S –
5.0 out of 5 starsMakes great prints. Only super dumb thing is no run out sensor is installed on it stock. It was easy to put the machine together. Runs fast and moderately quiet.
Bailey –
5.0 out of 5 starsThis is a great, easy to setup and easy to use 3D printer for beginners. I had amazing prints right off the bat and was able to start printing more complex prints pretty quickly. I’m a hobbyist and definitely not a professional so this fit my needs. I print mostly accessory pieces and props.
Tomás Ortiz Laverde –
5.0 out of 5 starsLlega en su caja bien protegida, tiene su manual en varios idiomas muy entendible y trae su kit de herramientas completo.Es fácil de ensamblar.
Texas –
5.0 out of 5 starsEasy to set up. Never used a 3d printer. This was so simple. I made the project on the SD card and I was impressed. I did purchase a pei replacement table pad. I saw videos that said there was a problem with projects sticking too well. I actually had to turn the temp up about 5 degrees to keep it from unsticking. Either way I’m very pleased my purchase. The software has a learning curve and comes with a pdf software manual. I’ve made several projects and am loving the outcomes. I’ve had fails but I’m learning from them too. PLA is relatively inexpensive compared to my other hobby’s. So fails are good! The free files are almost endless. They don’t all work as you’ll find out but many do and are impressive. If you’re looking for an easy hobby this is your machine. Purchased to make jigs for my fiber laser. I just can’t stop making other stuff. Soon!
Batman –
5.0 out of 5 starsDelivery was very fast but was totally blown away with not only the price but how big the unit was. I was expecting it to be smalle. It prints very fast too, I’m new to this as a buddy got me into it but seen others that friends have that were smaller and slower
CCMG –
1.0 out of 5 starsI really really tried. I was proud of it. Got a few prints. But the frustration and time wasted was too deep and eventually, it beat me. I have gone through five hot ends. I have used the preset profiles, 3rd party profiles, recommended ones. I have used their native slicer. In the end I bought a Bambu A1 Mini and have never ever had a problem. Do not take this path. Do not listen to the fanboys. Look elsewhere. Buyer beware.
Austin Harvey –
1.0 out of 5 starsAt first glance this printer is great, until you realize the features it offers don’t work properly. The auto-leveling is an absolute joke. I have to manually level it before each print otherwise the print will fail. Extrusion has issues pushing globs or too little at random times, and to top it all off the fan in the unit broke after 13 days of having it which seems to be a common issue with this model. I’ll be returning it for a different brand. I initially thought I got a lemon unit, but doing more research there are countless people who have the same issues as me, especially the leveling issues. I understand this is a budget printer, but the headache this thing has given me after such a short time owing it has pushed me to a point I just cannot validate the money for something so fragile and finnicky. If all goes well with the printer then the prints come out amazing, but unfortunately 7/10 prints fail for me even with all of the adjusting and fine tuning I have done to ensure the issue is not on my end. Best of luck to anyone that decides to buy this, I hope your experience is better than mine and I just got unlucky.